CONFIGURATION INSTRUCTIONS
1. Insert the batteries into the triggers and armours as shown.
2. Remove the plastic band from the battery compartment on the back of the
the upper one runs behind the neck and the lower one goes around the
chest. Adjust the length so that it is tightly fitted taking into account that the
elastic bands are fixed to the armour on the left side and, on the right side,
the upper one uses Velcro adjustment and the lower one is clipped on.
4. Press the on button on the armour and you’ll see how it lights up.
5.
ON
ON
mask. If you run out of batteries, pay attention to the following diagram and
do not confuse the polarities.
3. Place the armour at chest
level and adjust the
straps as shown, so that
Elastic
bands
REAR VIEW
REAR VIEW
3 LR44 button bat-
teries
3 LR44 button bat-
teries
3 AAA LR03
batteries
