!
CAUTION
If The JUGS Gun
™
is in low speed mode and you are trying
to measure high speed targets, there is a greater chance
that the radar will lock onto the speed of the pitcher’s arm
or the speed of the bat swing.
HOLD (HLd):
The HLd option lets you set the length of time that the
locked reading will show in the display window. The default setting is “5”.
BACKLIGHT (BL):
This turns on and off the LCD backlight. The backlight is
used to illuminate the display in low light conditions. The default setting is
“ON”.
SPEED UNITS (Su):
Speed units allow the user to switch from MPH (miles per
hour) to KPH (kilometers per hour).
5.2 Recall
The JUGS Gun
™
can store up to 5 events (5 trigger pulls and releases with a
speed being detected). Each press of the recall button steps back through
the speeds that have been stored. The speed is shown in the left hand side
of the window and the recall level is displayed in the right hand side of
the window. Recall will not scroll through the last five recordings unless
“HOLD” is indicated in the lower left hand corner of the display (figure 5.2).
• r1 indicates 1 event ago
• r2 indicates 2 events ago
• r3 indicates 3 events ago
• r4 indicates 4 events ago
• r5 indicates 5 events ago
The FAST speed corresponding to the recall level is displayed in the left
window.
To clear the recall events turn The JUGS Gun
™
off and back on.
Figure 5.2
Example showing a speed that was stored 3 events ago.
16
Radar Gun Instructions.10-2018.indd 17
9/27/18 11:20 AM