Operation
1701582 • 2018/12
JUDO JPF+
13
4.3
Maintenance, repair,
spare parts
WARNING
The device may only be repaired
by qualified technical personnel.
Only use original spare parts for
repairs.
Before performing work on the
device that goes beyond pure
operational use, the device
must be depressurised! If this is
ignored, the result may be uncon-
trolled egress of water result-
ing in water damage to the build-
ing/home.
4.4
Temporary removal of the
device
WARNING
If the device is removed due to an
interruption of operation:
•
Protect the flange surfaces
against damage to ensure proper
sealing.
•
Protect the device from dirt so
as not to impair drinking water
hygiene.
•
Store the device in a frost-free
place to prevent damage caused
by freezing water and leakage.
When recommissioning the device, proceed
as with a new installation.
5
Servicing
5.1
Cleaning
CAUTION
Do not use household cleaning
agents to clean the outside of the
device, but only use clear water to
avoid embrittlement of the plastic.
5.2
Warranty and maintenance
Prerequisite for obtaining the statutory war-
ranty claim is regular backwashing (see
chapter 4.1). The DIN EN 13443-1 pre-
scribes that the backwashing must take
place every six months. JUDO however
recommends to comply with the information
in chapter 4.1.1 Backwashing interval.
To ensure the process operates success-
fully as long as possible, regular inspec-
tion and routine servicing of the device are
essential. Where home automation is con-
cerned, this is governed by DIN EN 806-5.
We recommend the conclusion of a main-
tenance contract, which is the best way
to ensure a good operating function, even
beyond the warranty period. The skilled
tradesmen or the factory customer service
are suitable partners for regular mainte-
nance work and the supply of consumables
and wear materials as well as for possible
repairs.
