Judo PROFI JPF DN125, Инструкция по установке и эксплуатации, Страница: 5 / 8

1701803 • 2007/01 JUDO PROFI 5
Typ
Typ
Backwash Protective Filter
JUDO PROFI DN125 - DN200
Abbreviated name:
JPF DN125 - DN200
Models
Technical Data
The following applies for all the models of
the device:
– Pressure loss when clean (after back-
washing): 3 psi (20 kPa) at the water flow
rate (nominal flow rate) given in the ta-
ble.
– Maximum ambient temperature and wa-
ter temperature: 30°C (86°F).
– The water to be filtered must conform
to the European Drinking Water Reg-
ulations!
– Threaded connection to DIN 2999.
– Flange connection according to DIN 2633.
Nominal Pressure: 10 bar
Operating Pressure: 1.5 bar - 10 bar
The nominal pressure denotes the pressure
class, according to which the filter must fulfil
the German requirements (DIN 19632-100
and DIN EN 1334-1). The maximum operat-
ing pressure is lower, in order to ensure the
optimum function of the filter.
Installed dimensions
Model
Pipe con-
nection
Order No.
JPF DN125 DN125 8010035
JPF DN150 DN150 8010036
JPF DN200 DN200 8010037
Water flow rate
Model
Water flow rate for a pressure
loss of 0.2 bar with clean
sieve insert
1)
1) Data concerning the water flow rate are
valid for drinking water. The maximum water
flow rate for more polluted water is lower, de-
pending on the mesh size If so, a larger di-
mension has to be chosen.
JPF DN125 440 gpm (100 m³/h)
JPF DN150 660 gpm (150 m³/h)
JPF DN200 880 gpm (200 m³/h)
Model A B C D F
JPF DN125 560 250 430 191 ¾"
JPF DN150 560 468 453 207 ¾"
JPF DN200 600 474 469 238 ¾"
All dimensions in inch (mm) (see Fig. 4)
A = Installation length
B = unit width
C = Height above pipe centre
D = Height below pipe centre
F = Connection dimension
waste water
Fig. 4: Installed dimensions e.g.: JPF DN150