4
JUDO JRSF
Intended Use
Therefore, this instruction manual must al-
ways be read by the fitter and responsible
skilled personnel/owner or operator before
installation, putting into service and mainte-
nance.
Not only the general safety notes given in
the chapter “Intended Use” are to be ob-
served, but also the special safety notes
inserted under the other main items.
1.1
Symbols used
The safety notes contained in this instruction
manual are labelled with the following sym-
bols:
Notes directly attached to the filter, e.g.
–
Direction of flow
–
Rating plate
–
Cleaning information
must always be observed and kept in a fully
legible condition.
1.2
Safety information and dan-
gers due to non-compliance
In detail, failure to observe the general dan-
ger symbols can result, for example, in the
following risks:
–
Failure of important functions of the filter.
–
Danger to persons due to electrical and
mechanical effects.
–
Danger to persons and the environment
due to leaks.
Refrain from any unsafe working methods.
Failure to comply with this instruction manu-
al and the safety information can not only re-
sult in dangers for people but can also harm
the environment and the unit.
1.3
Units used
In derogation of the International System of
Units (SI = System International), the follow-
ing units are used:
2.
Intended Use
The installation and operation of the filter is
subject to the following existing national reg-
ulations.
In addition to the operating instructions and
the obliging regulations concerning accident
prevention that exist in the country of opera-
tion and the location of use, the established
technical regulations concerning safe and
professional work, should also be observed.
The water which is to be treated should
fulfil the requirements stipulated by Eu-
ropean drinking water directives!
It is absolutely essential that the manufac-
turer / supplier will be consulted prior to any
operation of the device using water of a dif-
ferent quality, respectively with water that
contains additives.
This filter is designed for use with cold drink-
ing water with a maximum water and envi-
ronmental temperature of 30°C (86°F).
The filter has been developed and manufac-
tured using state of the art technology and
the established safety regulations in Germa-
ny.
ATTENTION
Notes on ex-
isting dan-
gers
Warning, electrical voltage.
Torques specified by the manu-
facturer.
Tips for use and other informa-
tion.
Units
Conversion
°F
°F = 9/5°C + 32
bar
1 bar = 10
5
Pa = 0,1 N/mm²
1" DN
25
1¼"
DN 32
1½" DN
40
2" DN
50