(3) Setting Levels
1. Set a common frequency for both the receiver and transmitter by turning the Channel
Selector with supplied screw driver.
2. Turn the input gain control on the transmitter to a position halfway between the left and
right stops.
3. Set the ON/MUTE/OFF switch to ON to switch on transmitter.
4. Switch on the receiver and sound system.
5. Turn the volume control on the transmitter to maximum level (clockwise) and play a few
notes.
6. If the instrument sounds distorted turn down (count clockwise) the Input Gain to a
point where no distortion is heard. If the instrument sounds too low, turn up (clockwise) the
Input Gain just before distortion is heard.
10
5
4
5
5
2
5
2
4