Note
Installation and Operation
• UC-900 provides 4 RF input with operation frequency range of 470~970MHz. For optimum performance, please use same frequency
range for all transmitters. ( UDA-49P directional antenna not restricted. )
• Please use standard 50Ω BNC cable when connecting to the UC-900.
• Turn off the power of transmitters and UC-900 before installing or disconnecting.
59010-512-01
UC-900 Antenna Configuration
DC Output
12Vx4A(MAX)
RF Input
DC Output
12Vx4A(MAX)
100-240V
50/60Hz
FUSE: T3.15A/250V
4
BNC socket antenna input :
Can be connected to 4 transmitters. For best performance, please do not input more than +20dBm.
5
DC output jacks :
Provides DC 12V at max. 1A from each jack. (Total of 48W)
6
AC power input :
Power input 100~140VAC / 2A Max, 50/60Hz.
UC-900 Rear Panel
6
5
4
• Use 1/2 wave antenna or UDA-49P directional antenna to connect to the UC-900 Antenna Output. To avoid losing of transmitting
output power, if possible, please use shortest BNC –BNC cable when connect UDA-49P directional antenna to the UC-900
Antenna Output.
• Use the supplied BNC-BNC cables to connect the antenna outputs of each transmitter to the antenna inputs of the antenna combiner.
• If needed, connect the DC OUTPUT of combiner to the DC INPUT of each transmitter.
• Turn on the power and setup the frequencies of all transmitters. (All transmitters must be in the same frequency range.)
• Please turn off the power when not use or before disconnecting the cables or antenna.
Wireless Transmitter
UDA-49P
UC-900 Front Panel
UC-900 Rear Panel
DC Output
12Vx4A(MAX)
RF Input
DC Output
12Vx4A(MAX)
100-240V
50/60Hz
FUSE: T3.15A/250V
Antenna Output
CH1
CH2
CH3
CH4
Antenna Combiner
OR
1/2 wave antenna