Parts Identification
TG-10CH36/TG-10CH18
1. Power Switch and Indicator
2. DC input
3. Adaptor
4. Charger Slot
5. Charging Indicator
Installation and Operation
A. Connect AC output to outlet and DC output plug
into “DC input”. As soon as AC power is connected,
and "Power Switch" is turned on, the "Charging
Indicator" will flash.
Attention
The “Charging Indicator” may turn flashing for
self-testing during charging to protect batteries
from being damaged.
To avoid overheating, don’t close the cover during
charging.
To avoid being damaged, don’t drop the charging
case.
1
2
1
2
3
5
4
B. Plug the TG-10T/TG-10R into “Charger Slot” of
TG-10CH36/TG-10CH18. The “Charging Indicator”
will flash for seconds at beginning for initial testing,
and then shows green light when charging. It will
turn off when the battery is fully charged.
7
S
A 0 0 2
7
S
A 0 0 2
3
7
S
A 0 0 2
7
S
A 0 0
7
S
A 0 0 2
7
S
A 0 0 2
