background image

32

 ATOF: Automatic microphone off countdown under mute status

This function is deactivated.

 RFP: RF microphone power

rF Lo

10mW

rF Hi

50mW

OFF

This function is deactivated

1

1 minute countdown to turn off

10

10 minute countdown to turn off

30

30 minute countdown to turn off

The transmitter comes with 2 stages of RF power output (as per local regulations).

This shows that the RF output is LOW (10mW).

Volume adjustment

In non-setting mode, adjust the volume from 0 to -31dB using the 

/

 button.

 

The minimum volume is -31

 

dB.

 

The maximum volume is 0

 

dB.

 

The default setting is  -10

 

dB. 

Minimum volume at -31db; maximum volume 

at 0dB

Others

Pairing

See page 26.

The transmitter’s battery level is also shown on the LCD display. If the battery level is 

≤ 2V, the frame around the battery level will flash and the backlight turns into red as a 

warning (for                            and                            ).  

(The default setting is 10 minute.)

rC-FrE

Only frequency and group       
setting will be synchronized

rC-ALL

All data setting will be               
synchronized

 RC (Remoset Configuration)

The default setting is rC-FrE

.

 

Only frequency and group setting will be 

synchronized

.

Содержание RU-8011D-H









































Отзывы: