JTS IT-12D, Руководство пользователя

Страница: 10 / 24

5
Relay interpretation monitor (MONITOR): After pressing RELAY key, an interpreter
can turn the monitor rotary knob to select an interpreted language he/she can
understand to interpret.
Headphone volume control (VOLUME A, VOLUME B): To adjust the volume of the
headphones.
Relay interpretation switch (RELAY): In case the interpreter doesn’t understand the
original language, they can press the key and switch Monitor to another interpreted
language from other interpreter for further interpretation.
Floor Channel Switch (ORIGINAL): When the system start, the setting is by default,
press it to listen to the original language (the speech from CH0).
Mute Key (COUGH CUT): In case the interpreter coughs. Keep pressing the key to
mute the line, meanwhile the indicator is on. When released, the line returns to working
status.
MIC ON/OFF button (MIC.A ON/OFF, MIC.B ON/OFF): Press it to turn the
microphone on, the indicator will be on. Press it again to turn off the MIC.Only one
microphone can be on at a time. MIC. A and MIC. B will override each other.
Reminder key (SLOW): In case the delegate speaks too fast for the interpreter to follow,
press it to request the delegate to slow down.
MODE setting switch (OPEN / LOCK): The MODE switch needs be decided before
power on. At the OPEN mode an interpreter can activate any channel in any time as long
as it is not occupied. All channels are set off at the initial state, then an interpreter must
select channel key which he wants. At the LOCK mode the interpreter can choose only
one output channel which will not be taken by other users (setting procedure refer to
step and “System and Operation” chapter for more detail).
Setting switch (SET): When all Interpreter Console are connected, setting of a channel
of each console is needed for first time installation at LOCK mode. First turn the Switch
to “ON”, the ENTER key will start flashing. According to above Step No.20 to select one
channel for the console. Then turn the Switch to “OFF” to finish the channel setting.
To starting the channel setting procedure just turn the setting switches (SET) from “OFF”
to “ON”. Finish the channel setting procedure by turn the setting Switch from “ON”
to “OFF”.
XLR microphone input: Each interpreter unit including 2 balanced XLR microphone
input sockets with +48V Phantom power. These balanced microphones will be mixed
with MIC. A/B.
Input interface (INPUT): to connect the first Interpreter Unit to the IT-12M and the
second one to the Output interface of the first unit (25-pin socket).
29
29
29
29
22
21
23
24
25
26
27
28
29
30
31