JTS CS-120 Series, Руководство пользователя

Страница: 9 / 56

CS-120 Conference System Product Manual
4
1
2
3
4
5
6
7
2-1-1 Front Panel
Power switch
Main screen button: Press the button for 3 seconds, and enter the directory of CU
LCD; after entering the main screen, press the software button of each function as
the display shows to enter subdirectory; operate and set up.
320*240 LCD: Display CU’s state and directory.
Line in volume: Adjust Line input signal on back panel.
The maximum number of active microphones knob (1/2/4): Set the number of
speaking delegate units in conference.
Operation mode (Open/Override/Voice/Apply): Set the mode of speaking order
in conference. The following is function of each mode:
“Open” mode: When reaching the maximum number of active microphones (ac-
cording to the number of speaking units set by (5)), the function of speak button is
to register a speaking in order. A maximum of 6 microphones can wait in line for
speaking. The gooseneck light of pending microphones will flicker, but the users
cannot speak. When one active microphone is turned off, a pending microphone
will be on automatically in order.
“Override” mode: If reaching the maximum number of delegate units (according to
the number of speaking units set by (5)), the first active microphone will be turned
off automatically when the speak button of another microphone is pressed, and
the last delegate unit whose button is pressed can speak. The system will limit the
number of active microphones within the range set by (5).
“Voice” mode: The users do not need to press speak button but use voice to
activate the microphones. When the user speaks close to the microphone, the
microphone will be activated automatically. If the user stops talking for 5 seconds,
the microphone will be turned off automatically. The sensitivity can be set as high/
medium/low through unit settings of CU.
“Apply” mode: Press speak button of a delegate unit to apply for speaking instead
of speaking immediately. When the chairman approves the application, the micro-
phone of the delegate unit will be activated; if the chairman rejects the application,
the application will be cancelled and the microphone will not be activated.
Master volume: Regulate the speaker volume of all conference units.
Record: Press this button to record the conference.
SD card slot: The storage device of the recordings. When recording a confer-
ence, you need to insert formatted SD card (FAT format). The maximum stor-
age capacity of SD card supported by the product is 32 GB.
8
9