User Manual
4
800.321.6221
GuestCall Paging, Rugged Pagers
Model Number: J1703, J1704
>
Select the number of vibrations for that transmitter location, press ENTER to save.
Out of Range
With this feature, the pagers will signal (beep or voice) when taken out of range of the transmitter to inform the guest
that they are too far away and will miss their page. The alert will automatically stop when they step back within range.
Turning the Out of Range On/Off
>
Remove all pagers from the charging unit or unplug the power supply that is connected to the first charging
rack.
>
At the Out of Range menu, press the #/Select key to turn the out of range ON or OFF.
>
Press the ENTER key.
Creating Pager Groups
This feature allows the user to create a group to combine 2 or more pagers. Once the group is created, user can page
the pager using the group number. When a group page is sent, the Transmitter will page each pager sequentially.
The Transmitter can hold 20 different dynamic groups. Groups may have mixed pager types.
To Create a Pager Group
>
Scroll to ADD PAGER TO GROUP menu then press ENTER.
>
Enter the Group Number followed by ENTER key.
>
Enter the pager number you want to add to this group.
>
Select the type of pager.
>
To add more pagers to the same group, repeat procedures 1-4.
To Remove a Pager from a Group
>
Scroll to REMOVE PAGER TO GROUP menu then press ENTER.
>
Enter the Group Number followed by ENTER.
>
Enter the Pager Number you want to remove from this group.
>
Select the pager type.
>
To remove more pagers from the same group, repeat procedures 1-4.
