JTECH CommPass, Руководство пользователя

Страница: 7 / 12

7
7
16
15
6
5
14
5
Paging Using a 8205 or 8214 SmartAlert with RS232
and Telephone Transmitter Paging using the
Telephone:
1. Remove the Pager you wish to page from the Charger .
2. The
Pager will flash and vibrate to confirm it is
ready for use.
3. The
Pager charge LED will continue to flash, confirming
it is ready to receive a page.
4. Pick up the telephone and listen for the dial tone.
5. Dial the telephone number that has been assigned to
the Transmitter.
6. Listen for a beep from the telephone that confirms the
Transmitter is ready.
7. Within 8-10 seconds, use the telephone keypad:
a. Enter the Pager number (up to 4 digits).
b. Press the # key to send the page.
8. A beep will be heard on the telephone that confirms
the message was sent.
9. Hang up the telephone.
10. The
Pager will receive a single, one second
vibration (factory setting).
11. See Paging instructions in your
Transmitter manual
for more information.
Paging Using a 8205 or 8214 SmartAlert
with RS232 and Telephone Transmitter
3
3
3
3
3
3
3
3