4
1.
Introduction
The JDAM-9530 is a stackable USB to RS-232/RS-422/RS-485 converter that provides an
easy way to connect serial devices to personal computer via USB port. The RS-232 interface
supports full-duplex communication and provides CTS and RTS for hardware handshaking. The
RS-485 control is transparent to application softwares written for half-duplex COM port
communications. The JDAM-9530's Opto-isolators provide 3000Vdc of isolation to protect the
host computer from ground loops and destructive voltage spikes on the RS-232/RS-422 and
RS-485 data lines. The JDAM-9530 has built in surge-protection on each data line that protect the
module from destructive voltage spikes. The JDAM-9530 module is USB bus powered and no
external power is needed.
2.
Features
USB 1.1 Compliant
Auto data flow direction detection on RS-485
Full-duplex RS-232/RS-422 support
RS-232 RTS & CTS signals support
Minimum 3000 VDC isolation protection
Transient suppression on RS-485 data lines
Automatically switch USB signal to RS-232/RS-422 or RS-485 (jumperless)
Auto baud rate detection up to 115.2 Kbps
Reserved space for termination resistors R1(TX/DATA), R2(RX)
Power and activity indicator for troubleshooting
Driver support for Windows 95/98/ME/2000/XP, Linux
Power requirement: USB bus power
Mounts easily on DIN-rail or panel
