JRI Spy RF Test, Руководство пользователя

Страница: 4 / 6

©JRI 4
III. SPY RF USE
a) Stop
At reception, the SPY RF TesT is stopped. To activate it, you have to press on the button.
b) Start
To stop the SPY RF TesT, please press twice again the pushbutton.
c) Finding right places of spy RF recorders
Plug the Spy RF ModeM on the main power. The green led must light on.
Turn on the Spy RF TesT. The green light must light on.
Look for the best position (> 80%) according to the screen indications . Repeat the operation as many times as
necessary, depending on the number of recorders you have to place. If the level is below 80%, find another
position or if it will be necessary to use a Spy RF RelaY.
d) Finding right places of Spy RF RelaY
Plug the Spy RF ModeM on the main power. The green led must light on. Press the button on the side of the
ModeM to switch the power to 500mW; The red led must light on
Turn on the Spy RF Test and then press the pushbutton to switch the power to 500mW. The red led must light on
Look for the best position (> 80%) according to the screen indications. Repeat the operation as many times as
necessary, depending on the number of Spy RF RelaY you have to place regarding the position of the Spy RF
RelaY.
Once the position determined, move the ModeM Spy RF TestT to this position and search the position of the Spy
RF recorders (see III 3).
If the level is below 80%, it is necessary to use a 2
nd
Spy RF RelaY, so repeat the section (III 4)
Maximum reception level
The green led lights continuously. The Spy RF
TesT receive in 25mW (like any Spy RF except
Spy RF RelaY)