JRI Spy RF AIR, Руководство пользователя

Страница: 6 / 8

©JRI 6
g) Manual start
Press shortly on the pushbutton
h) Alarm visualisation
i) Measurement stop
Depending on the configuration, the SPY RF can stop recording or not. The different options are:
Rolling memory: once the memory is full, the new values replace the old ones.
Full memory: the recorder stops when its memory is full.
With the software: you can put the SPY RF in standby mode with Sirius when you do not use your recorder.
j) Leds and pushbutton actions functioning
The green led is on 2’’ when the measurement starts and then flashes each 1’ in recording mode.
Specials functioning regarding the recorder using mode :
Device set up in storage mode
Pushbutton pressing
Mode
< 5" 5’’> pressing <10’’
OFF -
The 2 leds are on and flash
at the same time.
Starting measurements
Pushbutton
Green led 2" = beginning of
measurements
-
Delayed (date & time) - -
Immediately - -
Measuring Green led 10" = auto control -
Alarm LED (red):
Flashes every 15’’.
Working LED (green):
2’’ => starting measurements
then flashes every 1 minute