JRG 9800.002, Инструкция по эксплуатации

Страница: 61 / 91

Operation Operating instructions
54

If the displayed value is outside the flow rate
limits, adjust it using the regulating valve (1).
The system produces until the Anolyte level
sensor sends a full level message, and
production resumes automatically when this
message is cleared.
10.4 Switching off the system

On the control panel, turn the Production rotary
switch to the Stop position.
The current production is stopped.
 Check whether the PLC (1) display shows the
following message:
 If a different message appears, refer to Chapter
12 „Troubleshooting“ 65.
 On the control panel, turn the main switch to
the 0 = OFF position.
The power supply is turned off.
Please note! After completing disinfection, the
mobile Hycleen Des 30 system must be made
storable (salt-free). For this purpose, the
system must be descaled and rinsed with water.
In addition, also make sure to store the reactor
wet.

See Chapter 10.5 “Decommissioning during
prolonged periods of non-use (downtime > 3
days)“ on page 55.
Sterisol
v1.0
Pump 1
Nx 1
1