JRC JUE-95SA - Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 70

JRC JUE-95SA - Скачать руководство пользователя страница 62

4-10

4.7 After service

4.7.1 Longevity/ exchange time of the consumption (lithium battery)

Contact the dealer from which you purchased the device or one of our marketing offices, when ALM
lamp of IME lights, or blinks with 1-second intervals (Life of longevity of the Lithium is approximately
10 years, however it might be shorten depend on the customer’s usage condition.

There is no influence in other telecommunication functions though the reception message and the call log,
etc. cannot be preserved in the power discontinuity, when the capacity of the lithium battery is lost.

DANGER

The lithium battery is built into JUE-95SA (EME).

Do not short-circuited of the terminal,

do not give the high impact, and wet it to water.

There is danger of exploding.

4.7.2 When ordering repair

When a failure has been detected, check it according to the Trouble shooting described in this manual.
When abnormalities are still accepted, stop operation and contact the purchasing dealer, JRC agent or one
of the JRC branches.

In the case of fixing during the term of a guarantee

When it breaks down in the state of the normal operation according to explanation and a handling
description in the operation manual, the dealer or our company will perform repair without any charge
according to the previsions in the specific action.

However, in the following case, gratis service cannot be received even if it is during the term of a
guarantee.

-When the construction report is not sent to JRC after installation of JUE-95SA is completed.

-Failure produced by inevitability, such as misuse, negligence, or a natural disaster, a fire, etc.

«
...
60
61
62
63
64
...
»

Содержание JUE-95SA -







































































Отзывы:

Нет отзывов