JRC JMR-5410-4X, Инструкция по эксплуатации

Страница: 405 / 688

13-23 Section 13 Setting up the Operation Mode
１
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
13.16 Setting Datum Conversion
Set for conversion of datum to the Japanese datum.
[Operation procedure]
Open the datum conversion setting screen by performing the following menu operations.
[Menu] button
→ Settings → Geodetic
Setting Item Description of Setting Setting Value
Convert WGS-84 to
Tokyo Datum
Enable/disable the data conversion function.
Disable: Received data is used without performing
datum conversion for the own ship’s latitude and
longitude and received AIS latitude and longitude.
Enable: When the datum of the own ship’s latitude
and longitude is WGS-84 or no DTM sentence has
not been received, own ship’s latitude and longitude
are converted to the Japanese datum.
The AIS latitude and longitude are converted to the
Japanese datum regardless of own ship’s latitude
and longitude.
To enable: Select
To disable: Clear
Except Own Ship’s
LAT/LON
Set enable/disable to exclude own ship's latitude
and longitude from the target of geodetic
conversion.
Enable: Own ship's latitude and longitude are not
converted to geodetic.
Disable: Own ship's latitude and longitude are
converted to geodetic.
When Convert WGS-84 to Tokyo Datum is enabled,
this setting is valid.
To enable: Select
To disable: Clear