JRC JMA-5352-9R, Инструкция по эксплуатации

Страница: 79 / 86

2-22
2.3 Functions of Software Buttons
yy
2
Own ship's information
①：
Heading device switching
The heading device is switched whenever this button is clicked.
GYRO
⇒
CMPS (Electronic compass)
⇒
GCOM (GPS compass)
⇒
GYRO
When the selected heading device is not connected to the equipment, an alarm is issued.
②：
Speed sensor switching
The speed sensor is switched whenever the button is clicked.
MAN (Manual)
⇒
LOG (Single-axis water log)
⇒
2AXW (Dual-axis water log)
⇒
2AXG (Dual-axis ground log)
⇒
GPS
⇒
MAN
When the selected speed device is not connected to the equipment, an alarm is issued.
③： Time display mode switching
The time display mode UTC (universal time clock) / LMT (local mean time) is switched
whenever this button is clicked.
④： Manual own ship's speed setting
When selection of the speed sensor is set to MAN , enter the own ship's speed manually.
If this button is clicked, the numeric value input screen is opened. After setting a value, determine the
entry by clicking ENT .