JRC JMA-2353, Инструкция по эксплуатации

Страница: 170 / 210

Chapter 4 MAINTENANCE
4.5 FAULT FINDING
4-22
Alarm name
(Japanese)
Alarm name
(English)
Class Description
操作中です
In Operation Status This operation is disabled due to another operation
 Setting enable/disable and class during alarm area
creation
 Setting operations for on/off and floating position
during EBL bearing setting
 Setting operations for on/off and bearing during EBL
floating position setting

Operations for on/off during VRM range setting

Operations for on/off, mode and saving during off
center custom position setting

Operations for PRF tuning during manual tuning
operations

Setting for automatic/manual mode during manual
tuning operations
 Operations for manual tuning during PRF tuning
operation
方位
/
緯度経度 無し
No HDG/POSN Data Status Cursor operations when own heading or latitude/longitude is
disabled
 MOB input
 Event mark input
 Inputting/erasing/moving marks
 Inputting/erasing/moving/inserting lines
 Floating position setting for EBL latitude/longitude.
 Floating position setting for VRM latitude/longitude.
 Floating position setting for parallel cursor
latitude/longitude
 AIS numerical display/destination ship/retrieved
vessel selection
 Creating latitude/longitude alarm area.
 TLL transmission for cursor.
できません
Not Allowed Status
 Operations for inserting by selecting the end point in
the line list.
 Operations for switching to H-UP during TM
(When heading is not available, temporarily changed
to RM-HUp, therefore, message is disabled.)
設定不可なレンジです
Range Scale Limit Status Operations functionally restricted for certain range.
 Zoom operations in range where zoom is not
available.
 Off center operations in range where off center is not
available.
 TM setting operations in range where TM setting is
not available.
データがありません
No Valid Data Status Operations without data.

Displaying history menu without history data.

Operations for editing/erasing in the mark list while
there is no mark.
 Operations for editing/erasing/inserting in the line list
while there is no line.