JRC JFC-130 -, Инструкция по эксплуатации

Страница: 59 / 82

Operation
41
<
Discriminating between the Sea Bottom and Fish Schools (WHITE LINE)
You can reject signals (colors) in the order of descending signal intensity to
discriminate between the sea bottom and fish schools or determine the
volume of a fish school. To monitor fish groups on and around the sea
bottom, set the white line to erase the strongest signal that represents the sea
bottom (reddish brown).
If a single color is scattered in signal strength, you can erase
signals in descending signal strength order.
To discriminate between the sea bottom and fish groups, follow these steps:
1.
Press the and keys at the same time to call up the
fishfinding menu.
2.
Using the or key, move to “2.WHITE LINE” and press the
MARK key.
3.
Press the MARK key to select between high and low frequency groups.
4.
Press the key to choose “ON” to enable the discrimination
function.
Pressing the key to choose ”OFF” disables the
discrimination function.
5.
Press the or key to set the level of the signal to reject.
Levels can be set in increments of 0.1 in a range of 0 to 10.
6.
Repeat steps
4
through
5
to set a white line for the other group of
frequencies as needed.
7.
Press the GRAPH key to return to the fishfinding menu.
8.
Press the GRAPH key to return to the fishfinding display.
1.COLOR REJ. ≫
2.WHITE LINE ≫ LO FRQ OFF HI FRQ OFF
3.ADJUST FREQ. ≫ LO FRQ 50.0 HI FRQ 200.0
4.TX PULSE WIDTH LONG SHORT
5.TX CYCLE MODE SYNC. ASYNC.
▲ 6.ADJUST TX CYCLE 0
▼ 7.ＰＤＣ HI FRQ Ａ Ｂ Ｃ Ｄ
LO FRQ Ａ Ｂ Ｃ Ｄ
8.ADC MODE BLU 1 2 3 4 5 STD 7 8 RED
9.STC MODE 50 100 150 200 (m)
10.EXT INPUT DISP OFF DISP ON
11.SIG.PROCESS OFF 1 2
12.SCROLL STEP 1 2 3
GRAPH
: RETURN TO F/F
MARK : GOTO SUB MENU≫
Fishfinding Menu 2.WHITE LINE
WHITE LINE LEVEL
HI FRQ OFF
▲ 5.0
▼ 0 2 4 6 8 10
ON
MARK
OFF
▲ 5.0
▼ 0 2 4 6 8 10
LO FRQ ON
GRAPH
: RETURN TO F/F NENU
WHITE LINE LEVEL Submenu