manualshive.com logo in svg

JRC Alphatron Marine AlphaTurn, Инструкция по установке и эксплуатации

Поделиться
Скачать
JRC Alphatron Marine AlphaTurn Скачать руководство пользователя страница 45

2.5.2.9 NMEA Settings ( NMEA SET )

The AlphaLine instrument is able to transmit NMEA sentence to the external listener.

In this software version, it only supports the sentence VBW and DDC.

Figure 43: NMEA OUTPUT

To set up the output settings, execute the following procedure:

1. In the MENU, touch the ADV SET button.

The PASSWORD screen appears.

2. Key in the password and confirm with the 

√

 button.

The ADVANCED SETTINGS MENU appears.

3. Touch the NMEA SET button.

The NMEA OUTPUT MENU appears, see Figure 43: NMEA OUTPUT on page 45

4.

•

Touch the + or - button to set SENTENCE to VBW, DDC or NONE.

•

Touch the + or - button to set INTERVAL to 100, 250, 500, 1000, 2000 or BY CHANGE.

•

Touch the + or - button to set PORT to OFF, UART0, UART1, UART2, UART3 or TCP.

5. Touch the 

√

 button when the settings are correct.

Note  Please refer to Supported NMEA Sentences IEC 61162 on page 49 for more details about the
supported sentences.

45  |  Operation

Содержание Alphatron Marine AlphaTurn


























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды