manualshive.com logo in svg

JRC Alphatron Marine AlphaTurn, Инструкция по установке и эксплуатации

Поделиться
Скачать
JRC Alphatron Marine AlphaTurn Скачать руководство пользователя страница 8

•

This product must be installed in accordance with the installation methods described in this manual. Acting
otherwise will void the warranty.

•

NOTICE

•

This product contains no operator serviceable parts. Service and repair shall only be carried out by personnel
trained and certified by ALPHATRON MARINE B.V.

•

NOTICE

•

Do not allow the instrument to fall or immerse into water. The equipment can be damaged.

•

NOTICE

•

If the instruments are not stored as described, it will void the warranty.

•

NOTICE

•

When cleaning the surface, do not use any organic solvent such as thinner or benzine. Otherwise, the paint
and markings on the surface may get damaged. For cleaning the surface, remove the dust and debris and
wipe with a clean dry cloth.

II.4 Warranty

Non-compliance with the installation, operation and maintenance requirements may void the warranty. Read Safety
Information on page 7.

Contact the Alphatron Marine dealer regarding the terms of the warranty.

II.5 Storage

The AlphaLine range of instruments are sensitive to humidity, temperature fluctuations and aggressive substances. Store
them appropriately.

•

NOTICE

•

If the instruments are not stored as described, it will void the warranty.

8  |  Safety Information

Содержание Alphatron Marine AlphaTurn


























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды