54 | Operation
This procedure works the same for all buttons and screens in the top row.
2.4.2 Set MAP View Preferences
The MAP screen display can be customized to user preference.
Figure 44: MAP view preferences
•
The orientation can be relative to the vessel (Vessel orientated), or with north up (world orientated). In case of
vessel orientated the bow of the vessel will be in actual bow direction and North and South will be shown rotated
depending on heading of the vessel. When the setting is not vessel orientated North will be up and the vessel will
rotate depending on the heading of the vessel.
•
The user can choose to have the target at the center of the map and the vessel moving (relative to world), or to have
the vessel at the center of the screen and the target moving (vessel fix, relative to vessel).
•
The map view can be set to zoom out automatically when the vessel is moving away from target Set Point, or it can
be fixed to keep current zoom setting.
2.4.2.1 Vessel Orientation in MAP Screen
To change to VESSEL ORIENTATION in the MAP screen perform following actions:
Figure 45: Vessel orientation
Screen on page 32).
2. Select the check box VESSEL ORIENTATED (Figure 45: Vessel orientation on page 54).
Observe that the bow rotates upwards and the north-south-east-west cross rotates to the heading of the vessel.
Содержание Alphatron Marine AlphaDynaPos
Страница 1: ...AlphaDynaPos Ship Automation and Navigation system Operation Manual www jrc am ...
Страница 5: ...5 Contents 4 2 Appendix B Checklist for Taking DP system into Operation 85 ...
Страница 13: ...13 Introduction III 3 System Overview DP2 Figure 2 system Overview DP2 ...
Страница 14: ...14 Introduction III 4 Sensor Overview Figure 3 Sensor Overview ...
