JR XP662, Инструкция по эксплуатации, Страница: 24 / 88

24
XP662 MANUAL Airplane
CHAPTER 6 : FUNCTIONS (SYSTEM MODE)
•
Airplane
The dual rate switch position is selectable and the
elevator and aileron dual rates can be combined on
one switch. This allows a single switch to be used
when moving from high rates for wild maneuvers to
low rates for mild maneuvers. Exponential Rate
(EXP) is also available for both aileron and elevator and works in conjunction with the dual rate function
to provide mild control movements around neutral
while allowing maximum servo travel. This reduces
sensitivity in the middle portion of the stick control
and still allows full travel at the end of the stick control.
Refer to section 7.3 for exponential rate adjustment.
1. Press the SCROLL and INCREASE buttons
simultaneously and hold.
2. Turn on the transmitter to enter the system mode.
3. Press the SCROLL button until “D/R SW” appears
on the screen.
4. Press the INCREASE or DECREASE button until
the desired switch position appears on the screen.
5. Press the SCROLL button to access the Wing
Type selection function.
6. To exit, press the SCROLL and INCREASE
buttons simultaneously.
Accessing the Dual Rate Switch Selection Function
DUAL RATE SWITCH SELECTION
6.3
E.A
SW
INDICATES DUAL RATE SWITCH FUNCTION
INDICATES SWITCH POSITION
E.A = ELEVATOR AND AILERON OPERATE INDIVIDUALLY
A. = OPERATION OF ELEVATOR AND AILERON DUAL
RATE ON AILERON DUAL RATE SWITCH
E. = OPERATION OF ELEVATOR AND AILERON DUAL
RATE ON ELEVATOR DUAL RATE SWITCH
CF = OPERATION OF ELEVATOR AND AILERON DUAL
RATE ON FLIGHT MODE SWITCH
D/R
COMBINED FUNCTION OPERATION OF ELEVATOR
AND AILERON DUAL RATE ON GEAR/MIX SWITCH
CHANNEL
SCROLL INCREASE
DECREASE
ENTER
Press the SCROLL
button until “D/R SW”
appears on the screen. Press the INCREASE or DECREASE button
until the desired switch position appears on
the screen.