Be sure to insert the negative terminal
of the connector facing towards
the bottom side of unit.
−
terminal
＋
terminal
Signal terminal
Serial bus adapter
Serial Bus channel shall
be decided by the
program on the
transmitter
PWM servo require
to use separate sold
PWM converter on
XBus serial connection.
Input XBus signal shall
output to every servo
out port.
XBus servo shall activate depending
on the designatedID channels.
Serial Bus connection by using
separate sold Bus adapter
This product shall feed the exact input voltage to the servo operating voltage.
Be sure to use the specified voltage on the servos.
RECEIVER
【
1
】
XBUS
OUTPUT
RECEIVER
【
2
】
XBUS
OUTPUT
Receiver
【
2
】
Bus signal
output to
the Port 9-16
Receiver
【
1
】
Bus signal
output to
the Port 1-8
Input PWM signal shall
output to the same
number of servo
output port.
PWM Connection by using the
8channel signal harness
Brown
Red
Orange
Yellow
Green
Blue
Purple
Gray
White
Black
Color of harness
RX ch
−
+
1ch
2ch
3ch
4ch
5ch
6ch
7ch
8ch
Connection list in
8ch receiver and
8ch PWM signal harness
16
14
12
10
15
13
11
9
1
3
5
7
2
4
6
8
CONNECTION
DIAGRAM-1
CONNECTION
DIAGRAM-2
8ch
RECEIVER
【
2
】
PWM
OUTPUT
Single battery connection
shall supply power to
both receiver connector
terminals.
Be sure to check the polarity before
actual insertion of the connectors.
Be sure to check the polarity before
actual insertion of the connectors.
*Note on Current JR servo
harness: White wire is the signal
wire, center wire is Positive and
the other side is negative.
Single battery connection
shall supply power to
both receiver connector
terminals.