NXU-2A Operations Manual
Interoperability Now!
3-13
NOTE
: The program defaults to serial port COM1. If you are using a different serial port you
must select the appropriate serial port from the File menu.
Make the appropriate changes by selecting the various menu options. When you have finished
making configuration changes, click the
Update Settings
button to save the new configuration
information in the NXU-2A. The NXU-2A will restart and the new settings will then be in
effect.
The
NXU-2A Setup Utility
allows the user to see the actual commands being sent to and
received from the NXU-2A. Click on the Terminal button to bring up the terminal window. If
you wish to enter an NXU-2A command manually you may type it into the
Command Entry
window and click
Send
. If an NXU-2A has been disconnected or powered down (and is no
longer in command mode) it may be placed in command mode by clicking the
Attention
button.
Figure 3-3 NXU-2A Terminal Screen
Содержание NXU-2A
Страница 12: ...NXU 2A Operations Manual 1 6 Interoperability Now This Page Left Intentionally Blank...
Страница 16: ...NXU 2A Operations Manual 2 4 Interoperability Now Figure 2 1 Outline Dimensions...
Страница 17: ...NXU 2A Operations Manual Interoperability Now 2 5 Figure 2 2 Control and Connector Locations...
Страница 54: ...NXU 2A Operations Manual 7 2 Interoperability Now This Page Left Intentionally Blank...