NXU-2A Operations Manual
3-12
Interoperability Now!
3.5.1
Store Setup Changes with SAVE Command
After any configuration changes have been made, SAVE must be typed in order to store the
new settings in memory. The NXU-2A will automatically restart after changes have been
saved. If you do not make any changes and want to return the serial port to the data mode, type
TRAN to place the serial port in transparent mode.
3.5.2
NXU-2A Configuration Using the NXU-2A Setup Utility
Included with the NXU-2A is a CD containing a program called NXU-2 Setup Utility. This
program, which runs under Windows 95, 98, NT, 2000, or XP, can be copied to the user’s hard
drive and executed from there. No installation is required. With the NXU-2A connected via the
serial cable to a suitable serial port on the PC, apply power to the NXU-2A. You should see the
lights on the front panel blink in succession. Then run the NXU-2A Setup Utility by double-
clicking on the program or by using the Run command from the Windows Start menu. You
should see the following screen:
Figure 3-2 NXU-2A Setup Screen
Содержание NXU-2A
Страница 12: ...NXU 2A Operations Manual 1 6 Interoperability Now This Page Left Intentionally Blank...
Страница 16: ...NXU 2A Operations Manual 2 4 Interoperability Now Figure 2 1 Outline Dimensions...
Страница 17: ...NXU 2A Operations Manual Interoperability Now 2 5 Figure 2 2 Control and Connector Locations...
Страница 54: ...NXU 2A Operations Manual 7 2 Interoperability Now This Page Left Intentionally Blank...