www.jps.com.tw
128
※ 14.4.6.0.2 BP2P Mode:Basic Point to Point:Dynamically-shaped Short Target Length
When desired target length is small, depends on the length, there are two possible motion profiles
shown below.
Motion Profile without Phase-IV
Compare this curve with the typical curve shown above, all operation settings are same except
the Target Length=180mm.
The motion profile generator cancels Phase-IV automatically, and adjusts Phase-II & Phase-IV in
the same time.
Motion Profile without Phase-II, Phase-IV and Phase-VI
Compare this curve with the curves shown above, all operation settings are same except the Target
Length=90mm.
The motion profile generator cancels Phase-IV, Phase-II & Phase-VI automatically, and adjusts Phase-I, Phase-III,
Phase-V & Phase-VII in the same time.