www.jps.com.tw
103
14.3.3 EGEAR Mode:Standard Pulse Command Mode:Digital Output
DOx _ Select
016,EGEAR:Position Error > Pr.170:Warning Level
DOx _ Select
017,EGEAR:Position Error <= Pr.170:Warning Level
This parameters, When the position error condition is true, the resulting output
。
【Note】
This function must be energized in the drive under the conditions set up
。
DOx _ Select
040,EGEAR:Standby
When this mode is selected, the drive in place and wait for the command
。
DIx(006)
RPM
Line Speed
DOx(040) When Pr.212 = 0
Pr.212
DOx(040) When Pr.212 > 0
DOx _ Select
041,EGEAR:Ramp Up
DOx _ Select
042,EGEAR:Max Speed
DOx _ Select
043,EGEAR:Ramp Down
When select this function,mean status
Ramp Up / Max Speed / Ramp Down。
【Note】
This function group, command & actual speed compared with each
conditions are satisfied, the resulting output
。
DOx _ Select
048,EGEAR:End
When themode selected, this function DIx (040) When Pr.212 = 0 the same
。
DOx _ Select
049,EGEAR:End & In-Range
When the mode selected, means the drive in place, position error <= Pr.170
。