background image

                              SC20MPC: 2 Mega Pixels Serial JPEG Camera User Manual

  

 

     

Spinel USA LLC                                                                                                                                                                      

www.jpegcamera.com

 

 

 
2 Mega Pixels Serial JPEG Camera

 

SC20MPC User Manual, Rev. E 

For latest user manual, please visit: 

www.jpegcamera.com

 

 

Introduction 

 
The SC20MPC Camera is a highly integrated serial JPEG camera module which can be attached to any host 
system that requires a JPEG compressed still camera for embedded imaging applications.  
 
The module uses a 1/4’’ CMOS color image sensor along with a JPEG compression chip that provides a low 
cost and low powered camera system. The module has an on-board serial interface (TTL/RS232/RS485) that is 
suitable for a direct connection to any host microcontroller UART or a PC system COM port.  
 
The SC20MPC camera is capable of outputting JPEG format images only. 
 
User commands are sent using a simple serial protocol that can instruct the camera to send high resolution 
(160x120 to 1600x1200) JPEG images for storage or viewing. 
 
The SC20MPC camera module comes in a compact form factor with a built in lens and PH 2.0 4Pin socket 
connector that provides easy access to both power and serial data. 
 
There are 8 lenses available for this camera from Spinel. A 60 degree (Standard), a 150 degree, 120 degree, 90 
degree, a 45 degree, a 30 degree, a 15 degree and a 8 degree. The SC20MPC ships with the 60 degree lens 
installed for standard order, other lenses can be installed in house before delivery for custom orders.  
 
There is a locking screw on the side of the lens mount, which is used to lock the focus in place once set, to 
prevent it from inadvertently being changed. 

 

Features 

 

Small size, low cost and low powered camera module for embedded imaging applications. 

 

5V DC Power Supply (standard), optional 12V or wide voltage 9-36V per request.  

 

On-board EEPROM provides a command-based interface to external host via serial link. 

Содержание SC20MPC








Отзывы: