4
QUICK START
JP Tech’s Time Based meters are designed for measuring accumulated seconds. TIME-P1 and
TIME-P3 models of the Time Based meters can also control two (2) pumps.
JP Tech’s Time Based meters incorporate a simple menu design featuring a two (2) button
keypad. Pressing the SELECT key once cycles through
different menu screens. Holding the SELECT key for
about three (3) seconds will enable changes to be made
on the menu screen chosen (not applicable on all
screens; see the Menu Operation section for information
on which values are editable).
After holding the SELECT key for three (3) seconds, a flashing cursor will appear, allowing for
changes to be made. In this mode, the SELECT key moves your cursor right, and the CHANGE
key advances the selected value by one. Once you have set the values you want, hold the
SELECT key to return to the menu.
NOTE: The SELECT key will not change any values by itself! It only provides a way to move
through menu screens or move the flashing cursor.
When the cursor is not flashing, pressing both the SELECT and CHANGE keys together will take
you back to the default ‘SECONDS’ screen (as shown above). However, while editing values
(cursor is flashing), pressing both the SELECT and CHANGE keys together will reset the value
to zero.
000000000000
SECONDS
OFF
The default menu screen, showing the non-
resettable second total
USING THE METER
