JP Fluid Control ST-SA Series, Инструкция по эксплуатации

Страница: 5 / 5

JP FLUID CONTROL
MANUAL-ST-SA English www.jpfluidcontrol.com 5
ST-SA SERIES
SOLENOID VALVES
4. SPARE PARTS
The coil can be replaced. The product codes of the coil are shown in the
table below.
Product Code Voltage
CS1-230AC 230V AC 50Hz
CS1-024AC 24VAC 50Hz
CS1-024DC 24V DC
CS1-012DC 12V DC
The diaphragm, springs and plunger of the solenoid valve can be
replaced. The product codes of the diaphragms are shown in the table
below:
Product Code Housing Seal
ST-SA-N-REV Brass NBR
ST-SA-E-REV Brass EPDM
ST-SA-F-REV Brass FKM
ST-SA-SN-REV Stainless Steel NBR
ST-SA-SE-REV Stainless Steel EPDM
ST-SA-SF-REV Stainless Steel FKM
Follow the drawing in 1.7 for the correct assembly of the solenoid valve.
5. DISPOSAL
The removal of the product should be performed in accordance with the
applicable laws. Keep in mind the media that are still present in the valve.
This manual can be downloaded from www.jpfluidcontrol.com Modifications reserved © JP Fluid Control
This document has been prepared with great care. JP Fluid control assumes no responsibility for any errors that may appear in this document. No rights can be derived from this document.