JP FLUID CONTROL
MANUAL-SMD-720-EN v1.2 www.jpfluidcontrol.com
3
SMD-720
ANALOG TIMER
4.
SETUP PROGRAM
The timer has a repeating ON-OFF program. The program
may be interrupted by terminating the power supply. The
program can be restarted by pressing the TEST button or
interrupting the power supply and connecting again. Set
the two rotary knobs by hand or with a small screwdriver to
the desired position. The left knob (ON period) has an
indication in seconds, the right knob (OFF-period) has a
minute indication.
T
ON
T
OFF
Sample application
This manual can be downloaded from www.jpfluidcontrol.com
Modifications reserved
© JP Fluid Control
This document has been prepared with great care. JP Fluid control assumes no responsibility for any errors that may appear in this document. No rights can be
derived from this document
