background image

1

Dear users,

Thank you for choosing this product. Please read the manual carefully before assembling and using it.

Please do not leave out the manual if you send this product to a third party.

1. Safety Instruction

Please read this manual carefully before installation, in which involves with important information about

installation

using

maintenance and safety.

Any undefined operations under this manual is not allowed, incorrect using may damage the product

even causing the injuries or property losses.

To consider the possible danger during the installation or using process of swing gate operator,

installation must strictly comply with the construction standard and electrical operating procedure.

Before installation, please make sure that the power voltage being used matches with the supply

voltage of this product. Please check if the leakage protection switch is installed and the grounding

system is correct.

Please check if additional equipment or materials are required to meet the specific requirements.

The disposal of packaging material must be complying with the local regulation.

Please do not change any parts except for those defined under this manual. Any undefined changes

may cause the malfunction. Any damages to the product arising therefrom shall be beyond the liability

of the company.

Please do not leak water or any liquid into the controller or any other open devices. Please disconnect

the power immediately if any mentioned cases happened.

Please keep this product away from heat and open fire. Or it may damage the components; cause the

failure or other hazards.

Please make sure there is no vehicles

passengers and objects passing through while the swing gate is

moving.

Anti-clip equipment like infrared protection switch must be installed to avoid injuries to person and

property losses. The company shall not be liable for any damage or accident arising therefrom.

The installation

using and maintenance of this product must be carried out by professionals.

Children are not allowed be touch the control devices or remote transmitters.

A warning sign must be placed somewhere on the swing gate according to the national standard.

Please keep this instruction properly for future reference.

Содержание SW300DC



























Отзывы: