- 12 -
Chapter V Failure Analysis and Removal
Faults
Reason
Countermeasure
Indicator not on
The nose is not set straight.
Reposition the nose
Power cord not plugged in
Plug the power cord to the bottom
The light is on and the
machine is not working
Feature not selected
Select the appropriate function
Too little water is filled to
the cup when no water is
poured into the cup
Fill between the upper and lower water
level scale lines
Temperature sensor faulty
Send to local after-sales service
department for maintenance
The motor is working
without stopping.
Inlet water into the nose
Send to local after-sales service
department for maintenance
Heat incessantly
Unfed
Fill ingredients according to the recipe
dosage requirements in the manual
Inlet water into the nose
Send to local after-sales service
department for maintenance
In normal heat
Wait a few minutes
No response to key
System not reset after power
failure
Power off for 3 minutes and then
power on
Machine itself faulty
Send to local after-sales service
department for maintenance
Food ingredients can't
be broken, overflow pot
Wrong selection function
Choose the right function
Too much or too little
ingredients
Fill ingredients according to the recipe
dosage requirements in the manual
Machine itself faulty
Send to local after-sales service
department for maintenance
Paste
Uncleaned dryness inside
cup
Clean the inside of the cup
Too many ingredients filled
Fill ingredients according to the recipe
dosage requirements in the manual
Too
long
working
hours,
no
other
abnormalities
Water temperature too low
Use warm water
Wrong selection function
Choose the right function