Joyner JNSZ800MVA, Руководство пользователя

Страница: 26 / 222

• Pull up on shift selector collar and move lever to center position to place trans-axle in neutral.
• Pull up on shift selector collar and move lever to position “R”, the vehicle will move backwards.
Switch
Ignition Switch:
Pull firmly up on the park brake lever with your hand until the lever is tight. Set
shift selector in neutral. Insert the key into key-switch, turn the key clockwise, and release the key
when the engine starts. (Warning: Don’t crank starter more than 5 seconds at one time). (See figure
4)
Turning-light switch:
control the turning- light. Press the top of button down and the right
turning light work; Press the bottom of button down and the left turning light work; Set the button in
neutral while moving in line. (See figure 5)
Head light switch:
control the headlight far beam or lower beam. Press the lower-beam button
down and the head light work as lower beam, the far-beam button and work as far beam. (See figure
5)
Park Brake Light switch:
control the 4 turning lights on or off. Pull the park-brake-light switch
out and the 4 turning lights illuminate together. (See figure 6)
Horn Switch:
control the horn. Press the horn button down and hold, the horn buzz. (See figure
7)
Spot light switch:
control the 4 spot- lights on or off.
Park brake lever
Shift Selector
Ignition Switch
Turning-light
Head light switch
Park Brake Light switch
Horn Switch
FIGURE 2
FIGURE 3
FIGURE 4 FIGURE 5
FIGURE 7
Spot light switch