Joyner JNSZ800MV, Руководство пользователя

Страница: 27 / 131

5) Shift Selector : Changes trans-axle gears from neutral to forward or reverse. Always
start engine in neutral. (See figure 3)
•
Pull up on shift selector collar and move lever to position
“1” “2” “3” “4”, the vehicle will
move forwards at different speed.
•
Pull up on shift selector collar and move lever to center position to place trans-axle in
neutral.
•
Pull up on shift selector collar and move lever to position
“R”, the vehicle will move
backwards.
Switch
6) Ignition Switch: Pull firmly up on the park brake lever with your hand until the lever is
tight. Set shift selector in neutral. Insert the key into key-switch, turn the key clockwise, and
release the key when the engine starts. (Warning: Don‟t crank starter more than 5 seconds
at one time). (See figure 4)
7) Turning-light switch: control the turning- light. Press the top of button down and the
right turning light work; Press the bottom of button down and the left turning light work; Set
the button in neutral while moving in line. (See figure 5)
8)
Head light switch: control the headlight far beam or lower beam. Press the lower-beam
button down and the head light work as lower beam, the far-beam button and work as far
beam. (See figure 5)
9)
Park Brake Light switch: control the 4 turning lights on or off. Pull the park-brake-light
switch out and the 4 turning lights illuminate together. (See figure 6)
10)
Horn Switch: control the horn. Press the horn button down and hold, the horn buzz.
(See figure 7)
11)
Spot light switch: control the 4 spot- lights on or off.
Park brake lever
Shift Selector
Ignition Switch
Turning-light switch
Head light switch
Park Brake Light switch
Horn Switch
FIGURE 2
FIGURE 3
FIGURE 4
FIGURE 5
FIGURE 7
FIGURE 6
Spot light switch