Joyner JNSZ650UV4S Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 76

background image

28

Protective Apparel

For your safety, we strongly recommend that you always wear an approved
motorcycle helmet, eye protection, boots, gloves, long pants, and long-sleeved shirt or
jacket whenever you drive.
Although complete protection is not possible, wearing proper gear can reduce the
chance of injury when you drive.
The following suggestions will help you choose the proper driving gear.

Helmets and Eyes Protection

Your  helmet  is  your  most  important  piece  of  driving  gear  because  it  offers  the  best
protection  against  head  injuries.  A  helmet  should  fit  your  head  comfortably  and
securely.
An  open-face  helmet  offers  some  protection,  but  a  full-face  helmet  offers  more.
Regardless of the style, look for a DOT (Department of Transportation) sticker in any
helmet  you buy. Always wear a face shield or goggles to protect  your eyes and help
your vision.

Operating this UV650-4S without wearing an approved motorcycle helmet, eye protection,
and protective clothing could increase your chances of head or eye injury, possibly death
in the event of severe accident.
Always wear approved motorcycle helmet that fits properly and wear eye protection
(goggles or face shield), gloves, boots, long-sleeved shirt or jacket and long pants.

Additional Driving Gear
In addition to a helmet and eye protection, we also recommend:

■

Sturdy off-road motorcycle boots to help protect your feet, ankles, and lower legs.

■

Off-road motorcycle gloves to help protect your hands.

Drive Training

Developing your driving skills is an on-going process. Even if you have driven other
UV650-4Ss, take time to become familiar with how this UV650-4S works and

«
...
26
27
28
29
30
...
»

Содержание JNSZ650UV4S













































































Отзывы:

Нет отзывов

Похожие инструкции для JNSZ650UV4S

Бренд: Snapper Страницы: 82

700 Diesel ATV 2007

Бренд: Arctic Cat Страницы: 184

FORMULA 500 1997

Бренд: Ski-Doo Страницы: 352

Бренд: E-TON Страницы: 36

Бренд: Oldenbourg group Страницы: 60

Бренд: Blaw-Knox Страницы: 118

Бренд: Tomberlin Страницы: 142

Бренд: swaploader Страницы: 94

Бренд: U-Line Страницы: 9

Бренд: NC Страницы: 84

Бренд: Parklands Страницы: 66

Бренд: Hammerhead Страницы: 70

Бренд: Hammerhead Off-Road Страницы: 75

Бренд: jcb Страницы: 2

Бренд: Wallenstein Страницы: 45

Бренд: Subaru Страницы: 1418

Бренд: Open Range Страницы: 88

Бренд: DETAIL K2 Страницы: 38

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды