Joyner Dirt Devil SZ250DS 2006, Руководство пользователя и каталог запчастей

Страница: 11 / 57

IS YOUR VEHICLE READY TO DRIVE?
Before each drive, it is important to inspect your Go-Kart and make sure any
problems you find are corrected. A pre-drive inspection is a must, not only for safety, but
because having a breakdown, or even a flat tire, can be a major inconvenience.
If your Go-Kart has overturned or has been involved in a collision, do not drive it
until your dealer has inspected your Go-Kart, There may be damages or other problems
you cannot see.
Pre-drive Inspection
Check the following items before you get on the Go-Kart:
■ Engine Oil
Check the level and add oil if needed. Check for leaks.
■ Fuel
Check the level and add fuel if needed. Also make sure the fuel fill cap is securely
fastened. Check for leaks.
■ Tires
Use a gauge to check the air pressure. Adjust if needed. Also look for signs of
damages or excessive wear.
■ Nuts & Bolts
Check the wheels to see that the axle nuts are tightened, Use a wrench to make
sure all accessible nuts; bolts, and fasteners are tight.
■ Under body & Exhaust System
Check for and remove any dirt, vegetation or other debris that could be fire hazard
or interfere with the proper operation of the Go-Kart.
■ Air Cleaner Housing Drain Tube
Check for deposits in the drain tube. If necessary, clean the tube and check the air
cleaner housing.
■ Leaks, Loose Parts
Walk around you Go-Kart and look for anything that appears unusual, such as a
leak or loose cable.
■ Lights
Make sure the headlight, brake light and taillights are working properly.