16
with the Velcro straps (Fig.4).
- Place the mattress in the crib. Make sure it is level (Fig.5).
Do not use the crib without the provided mattress.
At this point, the product is ready to be used in “crib mode”.
WARNING: always make sure that the side rail is raised, correctly attached and the zippers are
completely closed.
HEIGHT ADJUSTMENT
This crib is 5 levels high, to adjust them you must press the buttons on the side
supports at the same time and raise or lower the cradle as needed.
A click indicates locking in position (Fig.6).
Note: you can adjust the angle of the crib by lowering or raising one side as
needed.
WARNING: The crib can be inclined with a maximum variance of 2 positions between one side
and the other.
WARNING: The head of the child should always be positioned on the highest side.
WARNING: DO NOT carry out adjustment operations with the child inside the crib.
CO-SLEEPING MODE (FIXING TO BED)
- Zip down the two sides (Fig.7).
- Locate the buttons under the cloth (where the circle indicates), press it and remove the tube
(Fig.8).
- Lower the side barrier folding it down from both sides to same time. Once this operation has
been performed on both sides, fit the tube to the base of the crib (Fig.9).
Move the crib close to the parents bed.
WARNING: Use the crib with the tube lowered in co-sleeping mode only, attached securely to the
adult bed.
WARNING: There should never be any free space between the side bar of the window and the
adult mattress.
WARNING: In co-sleeping mode, the 2 legs of the crib should always be adjusted to the same
height.