joyami JCL01M, Руководство по эксплуатации

Страница: 9 / 18

08
Manufacturer: Chunmi Technology (Shanghai) Co., Ltd.
Address: 1/F Tower 2, 60 Naxian Road, Pudong, Shanghai, China
Fault Cause & Solution Fault Cause & Solution
ON/OFF
indicator
(Power indicator)
goes off
.
The temperature
is unable to control
during use.
The power plug is disconnected.
Check if the ambient temperature
is very high.
Firmware can’t
be upgraded.
No access
to Wi-Fi.
The induction
cooker suddenly
stops heating
during use.
Check if the air inlet/vent outlet is
blocked;
Check if the fan is rotating.
The temperature has reached the
preset value in temperature control
status.
Safety protection of the induction
cooker. Acknowledge the fault after
waiting for several to 20 sec.
Check if APP is the latest version.
Check if the Wi-Fi intensity is
strong enough at the position of
the induction cooker.
Check if the induction cooker is in
cooking process.
Check if Wi-Fi connection is normal.
Check if the fuse is burnt or circuit
breaker is tripped.
Check if the power socket is not
energized.
Check if the pot bottom is uneven
or sunken in the middle.
"No cooking ware"
error is reported
after working
for 3 sec.
Check if the pot used is proper.
Check if the pot is placed in the
middle of the heating surface.
Check if the diameter of pot bottom
is more than 12cm.
Troubleshooting
Fault Code
When the induction cooker has a fault during its operation, the OLED screen of the main rotary knob
displays a fault code. Please refer to the following table for troubleshooting.
No cooking ware
Cause Solution Fault Phenomenon
E-03 Abnormal voltage
E-04 Abnormal voltage
E-05 Too high temperature
E-07 Too high temperature
E-08 Report for repair
E-10 Report for repair
E-11 Report for repair
E-12 Report for repair
No cooking ware is placed properly
High-voltage protection
Low-voltage protection
Bottom temperature sensor
gives high temperature alarm
Bottom sensor is short circuited
or open circuited, or fails
Communication is abnormal between the
power supply board and the display board
Coil panel is open circuited
or not connected
IGBT gives high temperature alarm
IGBT is short circuited or
open circuited, or fails
Resume the program automatically
after a pot/pan is placed
Resume the program automatically
once the voltage is normal
Resume the program automatically
once the voltage is normal
Resume the program automatically
when the temperature drops
Resume the program automatically
when the temperature drops
Contact after-sales service
Contact after-sales service
Contact after-sales service
Contact after-sales service
Version ： V0.3