Carrying
Handle
Carrying
Handle
MagConnect
Mount Compatible
MagConnect
Mount Compatible
Certifications
• North America: Class I, Div. 2 & Class II, III Div. 1 & Div.
2, Groups A - G
• Europe: ATEX Zone 2 & Zone 22
ATEX standards and issue dates
• EN IEC 60079-0:2018
• EN 60079-11:2012
• EN 60079-15:2019
• EN 60079-31:2014
This case is certified and deemed safe to be used in
potenially hazardous environments. Please refer to the
certification label on the case or product page on The Joy
Factory’s website www.thejoyfactory.com for the certification
information.
FAQs
How does the user charge the device?
This case and tablet solution cannot
be charged anywhere in a hazardous
environment.
When in a safe
environment free from explosive vapors,
particles and debris the device can be
charged by opening the Charging Port
Cover on the case.
Cleaning Instructions
To safely clean the case and tablet solution use a cleaning cloth from
the below list of approved cleaners. Should one of these cleaning
solutions not be available a damp cloth may be used. HAZARD:
Never use a dry cloth to clean or wipe the case as this would cause a
hazard by producing static electricity.
Approved Cleaners:
•
Sani-Cloth
®
AF3
•
Super Sani-Cloth
®
•
CaviWipes
TM
•
Clorox Healthcare
®
Bleach Germicidal Wipes
•
Oxivir
®
Tb
Void If Broken
Can I open the case to remove the device
for servicing?
The tamperproof label must remain
intact at all times. This ensures the
tablet and case were installed in our
certified installation centers. Tampering
or removing the label voids the certified
installation of the solution. See section
“Label Inspection”.
What do I do if I need technical support?
The aXtion Extreme case is covered under a one-year manufacturing
warranty. The tablet is covered by the tablet manufacturer’s
warranty. Contact tablet manufacture for tablet technical support or
warranty service. Contact The Joy Factory for case technical support
and warranty service, or reinstallation of the case if a tablet
replacement or repair is needed.
360˚ Rotating
Hand Strap
360˚ Rotating
Hand Strap
360˚ Rotating
Hand Strap
360
˚
Rotating
Hand Strap
Multi-angle
Kickstand
Product Features
Accessories
Sun Visor | Harness &
Shoulder Strap
Harness secures the case for safe
transport and provides coverage from
sun glare.
Shoulder Strap
Harness
Inspections
before entering
the hazardous
environment:
1.
Label:
Check the certification label
to ensure the case is certified for
your work environment, and the
tamper proof label is not missing
or appears to be tampered.
2.
Case Body:
Inspect the case and
ensure there is no damage such
as cracks, or missing parts.
3.
Screen Protector and Camera
Lens Cover:
Ensure the screen
and lens cover have no crack
and is firmly adhered to the case.
4.
Port Cover:
Ensure all port
covers are completly closed.
Label Inspection
This hazardous location certified solution is void if the
tamperproof label is broken or appears tampered.
Due to the nature of hazardous locations this case and tablet solution will be utilized
in, its imperative to ensure the install tamperproof label is fully intact and shows no
signs of tampering. If at any time the tamperproof label is missing or appears to be
tampered, whether it is during initial deployment or during regular usage, place the
case out of service and contact your reseller. Each case solution should come with
two standard labels. The first label details the certification of the case and appears
on the backside of the case. The second is the tamperproof label which is placed
on the outer shell of the solution where the two outer shell pieces meet.
Void If Broken
Void If Broken
VESA 100 Compatible
VESA 100 Compatible
Beware
Hazardous Area
