
FIG-11
Assembling sitting board
FIG-12
Assembling front board
12. Align the front board (section 3) with bottom board’s corresponding battens, and then latch it with the left and right
boards respectively. Notes: Take caution of the glass door to avoid damage. See FIG-12.
13. Put the wires of front board and backboard into the cabinet to avoid pressing the wires during installing.
See
FIG-13
.Open the door, raise the top board high enough to see if it fits with the surrounding boards, then put down.
FIG-12
Setting the top board
FIG-14
Leading the wires of heaters onto the
board through the corresponding hole
14. During the course of putting down the internal top board, make sure all the wires (mentioned above) and connecting
plugs are slipped through the corresponding holes of the top board. All these wires will be led into connecting with the
controller on the internal top board.
See FIG-14
15.
See FIG-15.
Connect all the wires and connectors to the corresponding outlets on the top board. Please be sure all
the plugs are connected tightly.
8
Содержание Sponsorsun 1
Страница 1: ...HANDLEIDING Joy Sport Sponsorsun 1...
Страница 16: ...USER MANUAL Joy Sport Sponsorsun 1...