Joy Sport CT-Advanced, Руководство пользователя, Страница: 10 / 52

STEP:6
PEDAL TUBE ASSY. (
二 ）
NO PARTS LIST QUANTITY
STEP:7 UPPER SWING ARM ASSY.
NO PARTS LIST QUANTITY
#18 4
#65 4
#A 4
STEP:8
CENTER COVER & BOTTLE HOLDER ASSY
NO PARTS LIST QUANTITY
STEP:9
FIX HANDLEBAR ASSY.
NO PARTS LIST QUANTITY
As photo shown
1) Fit the fixed handlebar (#71) with screws (#6) and thru the bracket hold of
upright tube with screw driver.
2) Set both EKG cables thru the small holes under the fix handlebar (#71) on the
upright tube, pick up cables from top of the upright tube.
3) Secure the fix handlebar covers (#88A/#88B) with screw (#61)
Note: Bottom cover (#88B) got a nut inject in the bar.
As photo shown
1) Pre ‐ assemble the rear cover (#94) with bottle holder Grey (#105) with
screws (#104)
2) tighten up the front cover (#95) with rear cover (#96) with screws (#29) for both
right & left side. Finally secure the font cover A(#93) with rear cover A (#94)
with screw (#29)
As photo shown
1) Insert both swivel tubes (#85/#86) into the connecting tubes (#69/#70), secure
both tubes with the knob screws (#44).
2) Three locations on the swivel tube available adjust to lock with the middle holes
for both right/left tubes.
As photo shown
1) Set the swing arm handlebars R/L (#72/#73), insert to both swivel tubes
(#69/#70).
2) Turn and match the handlebars with the aligned holes, secure parts (#72/#69)
also (#73/#70) with screw (#18) and special spring washer (#A) then flat
washer (#65), tighten up both totally.
#18 4
#44 2
#29 12
#104
#6 2
4
1
#88A/B 1
#61
JOY SPORT 9