Joy-it StromPi 3 Скачать руководство пользователя страница 3

Страница: 3 / 4

www.joy

it.net

Pascalstr. 8 47506 Neukirchen

Vluyn

Your StromPi is in flash mode when the blue LED lights up dimly, as

shown in the picture below

Copy the firmware into a folder you can reach quickly, e.g. "/home/pi/".

Now you can open the terminal on your Raspberry Pi and enter the follo-

wing command to flash your StromPi3:

Where "RB

StromPi3_Rev16042018.binary" is the file name of the firmwa-

re, which you would have to change if necessary.

If the flash process was successful, you should see the following:

Now disconnect all power supplies, remove the CAP jumper, set the flash

jumper to OFF and then set the CAP jumper back to ON.

You can now use your StromPi with the new firmware.

4. FLASHING THE FIRMWARE

stm32flash /dev/serial0

w RB

StromPi3_Rev16042018.binary

b 9600

Содержание StromPi 3

Страница 1: ...Manual 1 GENERAL INFORMATION Dear customer thank you very much for choosing our product In following we will introduce you to what to observe while starting up and using this product Should you encoun...

Страница 2: ...Raspberry Pi To do this enter the following command First disconnect your Raspberry Pi and your StromPi from all power supp lies Remove the CAP jumper Now set the flash jumper of the StromPi to ON an...

Страница 3: ...o wing command to flash your StromPi3 Where RB StromPi3_Rev16042018 binary is the file name of the firmwa re which you would have to change if necessary If the flash process was successful you should...

Страница 4: ...f in normal household quantities independently of the pur chase of a new appliance Possibility of return at our company location during opening hours SIMAC Electronics GmbH Pascalstr 8 D 47506 Neukirc...