Ausgabe 12.11.2018
Copyright by Joy
-
IT
18
3
4.
Mounting the claw
At first, 4 claw
-
fingers are screwed alternating with the brass spacers. In the end, fix the construction with
screws on the one, and nuts on the other side.
Fix the holdings with screws.
Mount 4 brass spacers to the servo. Watch out that one washer is placed
underneath and one washer is placed above the spacers.
After that, place a screw through the plate and fix it to the servo.
Two washers are placed on the screw!!!
2x
Robot 02
