Joy-it LINKERKIT OLED Скачать руководство пользователя страница 8

5. SUPPORT

If any questions remain open or problems arise after your purchase, we are 

available by email, telephone and ticket support system to answer these.

E-Mail: [email protected]

Ticket-System: http://support.joy-it.net

Telephone: +49 (0)2845 98469 – 66 (10 - 17 o‘clock)

For more information visit our website:

www.joy-it.net

www.joy-it.net

Simac Electronics Handel GmbH

Pascalstr. 8 47506 Neukirchen-Vluyn

Published: 31.07.2019

Our information and take-back obligation according to the 

Electronic and Electrical Equipment Act (ElektroG) 

Symbol on electrial and electronic products : 

This crossed-out bin means that electrical and electronic products do not 

belong into the household waste. You must hand over your old appli-ance 

to a registration office. Before you can hand over the old appliance, you 

must remove used batteries and accumulators which are not enclosed by 

the device. 

Return options :

 

As the end user, you can hand over with the purchase of a new device 

your old appliance (which has essentially the same functions as the new 

one) free of charge for disposal. Small devices which do not have outer 

dimensions greater than 25 cm can be submitted independently of the 

purchase of a new product in normal household quantities. 

Possibility of restitution at our company location during our opening 

hours: 

Simac GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn 

Possibility of restitution nearby : 

We send you a parcel stamp with which you can send us your old appliance 

free of charge. For this possibility, you must contact us via e-mail at 

[email protected] or via telephone. 

Information about packaging: 

Please package your old appliance safe during transport. Should you not 

have a suitable packaging material or you do not want to use your own 

material, you can contact us and we will send you an appropriate package. 

4. FURTHER INFORMATION

2

1

Содержание LINKERKIT OLED









Отзывы: