2. SAFETY INSTRUCTIONS
Safety Terms and Symbols:
following terms may appear on product:
Danger
It represents that harms may be caused to you at once if you per-
form the operation.
Warning
It represents that latent harms may be caused to you if you per-
form the operation.
Notice
It represents that damage may possibly caused to the product or
other properties if you perform the operation.
Symbols on the product:
following symbols may appear on product:
General Safety Summary
Read the following safety precautions to avoid injury and prevent damage
to this product or any products connected to it. To evade potential haz-
ards, use this product only as specified.
Only qualified personnel should perform maintenance.
Use suitable power cord.
Use only the power cord specified for this prod-
uct and certified for the country of use.
Connect and disconnect properly.
Connect a probe with the oscilloscope
before it is connected to measured circuits; disconnect the probe from the
oscilloscope after it is disconnected from measured circuits.
Ground the product.
This product is grounded through the grounding
conductor of the power cord. To avoid electric shock, the grounding con-
ductor must be connected to earth ground. Before making connections to
the input or output terminals of the product, ensure that the product is
properly grounded.
Notice
Please read
the manual
Protective
ground
terminal
Measuring
ground
terminal
Chassis
ground
terminal
